Hello There, Guest! Register


Login or Register to remove all advertising



1 user browsing this thread: (0 members, and 1 guest).

Post Reply 
Just an idea, using crystalline mones and adding bacteria
Author Message
velinxs
Offline
Contributes Regularly




Joined: Jul 2011
Sex: Male
Posts: 119

Reputation: 299
Rep Post

Thanks Given: 148
Thanks received:
115 thanks in 65 posts



Post: #1
Just an idea, using crystalline mones and adding bacteria
04-02-2013 6:08 PM

title says it all, has anyone thought of this?

From what i understand Androstenone (i very may well be wrong, still new at the science end of this) is the basic male male pheromone, that then breaks down on the body when exposed to bacteria (sweat) into other pheromones.

So what if you took crystalline form androstenone (or any mone) and added some sweat, allowed to age for a few hours, or a day, then added alcohol to kill the process and DPG as a fixative?

could end up with something similar to a lacroy buildup in a bottle?

EDIT:
put this in wrong section, WHOOPS. admin?

my journal;
]stuff:
Aqua Vitae
Wolf
Nude Alpha 10ml
Hypnotica Social
Corporativo
Androstadienone 5ml LaL
New Pheromone Additive
TUTH 7.5 mcg/spray
P83 7.5 mcg/spray
p102 5 mcg/spray
Androstenetrione 100mg/20ml
Androstatrienedione 100mg/10ml
(This post was last modified: 04-02-2013 7:14 PM by velinxs.)
04-02-2013 6:08 PM
Find all posts by this user Quote this message in a reply
Thanks given by idontknow
Login or register to remove all advertising

wiserd
Offline
I'm so meta, even this acronym




Joined: Nov 2011
Sex: Male
Posts: 1,509

Reputation: 1495
Rep Post

Thanks Given: 1629
Thanks received:
1434 thanks in 735 posts



Post: #2
RE: Just an idea, using crystalline mones and adding bacteria
04-02-2013 10:55 PM

I wouldn't say that androstenone is the basic male anything, really. There are dozens of potential pheromones which haven't been explored yet. Androstenone is just one really well studied pheromone. Testoterone may very well be better than androstenone if it were legal. Androtics suggested as much, way back in the day. If we were going to do the process you suggest, I'd start with DHEA or pregnenolone. Those molecules are dirt cheap, and also higher up the cascade in the process of steroidogenesis.

http://en.wikipedia.org/wiki/File:Steroidogenesis.svg

Notice how the steroids start with cholesterol, then you get pregnenolone (which has 21 carbon atoms) and you gradually you lose more carbon atoms as they move through the process.

What you're describing might very well work. Or you might just get bacterial consumption of the stuff you used.

But hey, do the experiment and post your results. It sounds like an interesting thing to try.

[Image: Example.jpg]
04-02-2013 10:55 PM
Find all posts by this user Quote this message in a reply
Thanks given by velinxs
kmacc45
Offline
Member in Moderation




Joined: Sep 2010
Sex: Male
Posts: 675

Reputation: 888
Rep Post

Thanks Given: 301
Thanks received:
927 thanks in 339 posts



Post: #3
The synthesis of testosterone from dhea on your kitchen counter
04-03-2013 5:28 AM

many of you have seen my other posts about making steroids synthetically but always in the context of a laboratory setting, a masters in organic synthesis etc.. Lord knows over the years i have had my hands in a fair number of batches of a multitude of steroids, many of you have probably tasted my fruits but will never know.
myself and the boogeyman set out to attempt to do this synthesis with absolutely nothing from a scientific supply house, no glassware, no ph papers no all. We succeeded and ended up with base test so pure it crystallized like shattered glass.
THEORY: DHEA is two synthesis steps away from test base, one oxidation, one reduction. The most logical way is to reduce first the 17=O to create 5 androstenediol, this way there are many selective oxidation agents that will only convert the 3-OH to a =O and not the 17. Since DHEA is not water soluble one can not use water as a solvent for the reaction, the obvious choice is methanol since the reduction is done with sodium borohydride. A large excess of methanol is used because 5androdiol is much less soluble in methanol than DHEA so as it is formed it will slurry. The second step is full of possibilities but the available selective oxidizer is manganese dioxide, in this case the reaction is done in acetic acid which gives slight solubility to the androdiol to transiently come in and out of solution to react

experimental: DHEA was purchased from china in one kg quantity, methanol or methylhydrate from canadian tire, sodium borohydride from a hydrogen cell engine supplier online fifteen grams for fifteen dollars, good for 60 grams test. 10 grams DHEA dissolved in 400ml methanol and stirred using a milk frother in a regular glass nestled in ice. 2.5 grams sodium boro are slowly added as powder at a rate that does not allow the temp to exceed 40C. if a slurry forms thats good, it means product is forming, just add more cold methanol. after a total of one hour add vinegar until the bubbling on addition stops then dump into a liter of ice water. filter thru coffe filter and squeeze dry. dry in oven at 60C.
activated manganese dioxide is made from manganese dioxide from a ceramics supplier and then its boiled in nitirc acid to activate. make nitric acid by adding boiled down battery acid to stump remover (potassium nitrate) then boiling inside a bottle with a hose running to another bottle nestled in ice to collect the nitric acid. filter and rinse with an anhydrous solvent like a fuel system water remover, activated mang diox must be absolute dry. put the diol from the first step in 300ml acetic acid then slowly add the mang diox as a powder same fashion as above, stir for six to ten hours, you won't over oxidize since exact molar equivalents are used. now flood the reaction with five times volume ice water and filter out the base test plus unreacted diol and DHEA, minimum purity will be about 70%

note we activated mang diox by azeotropic distillation with benzene as we are too lazy to make nitric acid.

75 grams of DHEA can be had for about a buck a gram, all together maybe 2-4 dollars a gram for heat free decent test.

http://www.elitefitness.com/forum/bodybu...62191.html
04-03-2013 5:28 AM
Find all posts by this user Quote this message in a reply
Thanks given by wiserd, idontknow
wiserd
Offline
I'm so meta, even this acronym




Joined: Nov 2011
Sex: Male
Posts: 1,509

Reputation: 1495
Rep Post

Thanks Given: 1629
Thanks received:
1434 thanks in 735 posts



Post: #4
RE: The synthesis of testosterone from dhea on your kitchen counter
04-03-2013 5:45 AM

(04-03-2013 5:28 AM)kmacc45 Wrote:  many of you have seen my other posts about making steroids synthetically but always in the context of a laboratory setting, a masters in organic synthesis etc.. Lord knows over the years i have had my hands in a fair number of batches of a multitude of steroids, many of you have probably tasted my fruits but will never know.
myself and the boogeyman set out to attempt to do this synthesis with absolutely nothing from a scientific supply house, no glassware, no ph papers no all. We succeeded and ended up with base test so pure it crystallized like shattered glass.
THEORY: DHEA is two synthesis steps away from test base, one oxidation, one reduction. The most logical way is to reduce first the 17=O to create 5 androstenediol, this way there are many selective oxidation agents that will only convert the 3-OH to a =O and not the 17. Since DHEA is not water soluble one can not use water as a solvent for the reaction, the obvious choice is methanol since the reduction is done with sodium borohydride. A large excess of methanol is used because 5androdiol is much less soluble in methanol than DHEA so as it is formed it will slurry. The second step is full of possibilities but the available selective oxidizer is manganese dioxide, in this case the reaction is done in acetic acid which gives slight solubility to the androdiol to transiently come in and out of solution to react

experimental: DHEA was purchased from china in one kg quantity, methanol or methylhydrate from canadian tire, sodium borohydride from a hydrogen cell engine supplier online fifteen grams for fifteen dollars, good for 60 grams test. 10 grams DHEA dissolved in 400ml methanol and stirred using a milk frother in a regular glass nestled in ice. 2.5 grams sodium boro are slowly added as powder at a rate that does not allow the temp to exceed 40C. if a slurry forms thats good, it means product is forming, just add more cold methanol. after a total of one hour add vinegar until the bubbling on addition stops then dump into a liter of ice water. filter thru coffe filter and squeeze dry. dry in oven at 60C.
activated manganese dioxide is made from manganese dioxide from a ceramics supplier and then its boiled in nitirc acid to activate. make nitric acid by adding boiled down battery acid to stump remover (potassium nitrate) then boiling inside a bottle with a hose running to another bottle nestled in ice to collect the nitric acid. filter and rinse with an anhydrous solvent like a fuel system water remover, activated mang diox must be absolute dry. put the diol from the first step in 300ml acetic acid then slowly add the mang diox as a powder same fashion as above, stir for six to ten hours, you won't over oxidize since exact molar equivalents are used. now flood the reaction with five times volume ice water and filter out the base test plus unreacted diol and DHEA, minimum purity will be about 70%

note we activated mang diox by azeotropic distillation with benzene as we are too lazy to make nitric acid.

75 grams of DHEA can be had for about a buck a gram, all together maybe 2-4 dollars a gram for heat free decent test.

http://www.elitefitness.com/forum/bodybu...62191.html

Very nice! Good research. I hesitate to do it since I have no way to characterize the result and there seem a lot of opportunities to mess things up, but it's really tempting.

Would rep, but I'm all out.

[Image: Example.jpg]
04-03-2013 5:45 AM
Find all posts by this user Quote this message in a reply
Thanks given by velinxs
velinxs
Offline
Contributes Regularly




Joined: Jul 2011
Sex: Male
Posts: 119

Reputation: 299
Rep Post

Thanks Given: 148
Thanks received:
115 thanks in 65 posts



Post: #5
RE: Just an idea, using crystalline mones and adding bacteria
04-04-2013 7:00 PM

that's epic stuff. wish i could understand what i just read. so what if you took that then, added bacteria from sweat, let sit in a petri dish. kill the process with some alcohol and add a fixer? simulated natural pheromone signature? that would be interesting.

my journal;
]stuff:
Aqua Vitae
Wolf
Nude Alpha 10ml
Hypnotica Social
Corporativo
Androstadienone 5ml LaL
New Pheromone Additive
TUTH 7.5 mcg/spray
P83 7.5 mcg/spray
p102 5 mcg/spray
Androstenetrione 100mg/20ml
Androstatrienedione 100mg/10ml
04-04-2013 7:00 PM
Find all posts by this user Quote this message in a reply
Login or register to remove all advertising


Share This Thread
Post Reply 


Forum Jump:

Current time: 08-22-2017, 2:42 PM
Contact Us Home Return to Content Lite (Archive) Mode RSS Syndication Forum Disclaimer